stand cover

Camozzi Automation GmbH

Stand: 245
Control cabinet - construction, assembly, installation
Drive Technology
Electronics and connectivity
Energy supply and connection technology
Handling technology
IIoT – Industrial internet of things
Robotic - End of Arm Tooling - EAOT
Robotic – (HRC) Human robot collaboration
Sensors, measurement and control technology
Special machine construction
https://www.camozzi.com/de

About us

SMART WORKING WITH DIGITAL TECHNOLOGIES AND TRADITIONAL SOLUTIONS

Camozzi Automation focuses on digitalization, mechatronics and intelligent components and has developed a series of new Industry 4.0 ideas and solutions.
solutions that are guided by the criteria of environmental sustainability. For the production of these new products, the paradigms of reducing energy consumption and introducing environmentally friendly materials are the fundamental design factors.
In the field of digitalization, Camozzi uses condition assessment technologies at the component level, which help to make plants more efficient, avoid machine downtime and monitor the condition of components: The <b>Valve Island Series D</b> and the <b>Proportional Pressure Controller Series PRE</b> are equipped with CoilVision technology, which enables continuous monitoring of the operating status of each individual valve. Thus, any malfunctions are predicted in good time. The recorded data is transmitted wirelessly for logging, summary and analysis and can be visualized via the free UVIX software.

The new motor with integrated <b>drive controller series DRVI</b> enables dynamic acceleration and deceleration, high precision of the motion sequence, at all speeds without loss of steps. Compatible with the most common bus protocols: CANopen - PROFINET - EtherCAT - EtherNet IP.

This new <b>smart gripper</b> is equipped with an integrated sensor system for position and force control and can wirelessly transmit the data acquired from the workpiece. The Camozzi gripper is not only “smart”, but can also be reconfigured depending on the objects to be handled. This makes it perfect for the handling and robotics sector.

To make a system energy-efficient, it is crucial to control the output pressure according to demand and only increase it where necessary: the new pressure amplifier of the BPAseries is used to optimize pneumatic control. To reduce investment and manufacturing costs as well as consumption.

Camozzi is embracing green thinking with smaller, more compact components in its portfolio. These include the new GRIPfit push-in fittings, made of biocompatible plastics, available for the following application areas: Automation | Cooling | Beverage | Medical.

The new compact gripper of the CGPL series features large strokes that allow it to grip components of different sizes. It is equipped with recirculating ball bearing guides to move larger loads and operate at high cycle rates. The new pneumatic slide series MTS and MSN are designed for systems that allow a high number of cycles and high positioning repeatability. These are also equipped with miniature recirculating ball bearing guides for uniform motion, making these slides compact, fast, stable and permanently reliable.

In the field of robotic systems, Camozzi has developed the tool changer series RTC, for a safe and fast tool change. The compact design allows easy integration into industrial robots and cobots and features an automated opening and closing of the locking system.

Our product categories
Pneumatic & electric actuators – Handling & vacuum – Valves & solenoid valves – Valve terminals & fieldbus modules—Proportional technology – Air Treatment – Fittings – System solutions – Customised solutions.
Camozzi Automation was founded in 1964 and is part of the globally successful Camozzi Group. Camozzi Automation develops and manufactures components, systems, and technologies for drive technology and fluid control for the industrial automation, transportation, and life science sectors.

Products & services

product-image

Robot tool changer | Series RTC

The RTC series robotic tool changer is the ideal solution for industrial applications that require an efficient and reliable device for quick and safe tool changes (gripping or work systems). It is available in three sizes; 50, 90 and 150 and offers high reliability and sturdiness, handles loads of up to 50 kg and guarantees excellent performance even in the most demanding operating conditions. Thanks to its compact design, the tool changer can be easily integrated with industrial robots and cobots, which on the one hand improves the efficiency and productivity of production lines and on the other hand offers greater flexibility and quality of work. Using a special pneumatically operated accessory, the tool changer automates the opening and closing of the locking system, eliminating the need for an operator to do this manually. This makes the tool changing process faster and more accurate, human error is reduced to a minimum and a more reliable system is ensured.

product-image

Push-in Fittings | GRIPfit

The GRIPfit is a new generation of push-in fittings made with high-performance materials and equipped with a flexible stainless steel gripping ring to facilitate the connection and disconnection of most semi-rigid tubes, limiting the effects of tube marking and guaranteeing a robust and reliable tightening on the whole surface of the tube. GRIPfits are ideal for vacuum and low pressures both in static and dynamic applications, thanks to the new shaped sealing technology. These new push-in fittings have been developed to cover and satisfy the needs of various market applications. The materials used comply with the main standards and directives and have been designed to meet and adapt perfectly to the specific application requirements of each sector.

product-image

Compact electromechanical cylinders Series 3E

Series 3E cylinders are electric rod actuators that combine a screw and motor to generate accurate linear motion. These are an alternative to pneumatic cylinders but possessing all the benefits of electric actuators in terms of speed, ease of parameter setting and flexibility in handling different load sizes and formats. Their compact design ensures easy integration with the machine, without affecting performance. Robust and quick, these actuators are ideal for multi-position applications and can be used with external proximity switches for homing operations or allowing extra-stroke readings to be performed. Moreover, Series 3E can be supplied with the motor already assembled, to further reduce commissioning and wiring time.

product-image

Integrated field-oriented control drive | Series DRVI

The Series DRVI integrated motor drive is designed to control various types of motors, both stepper and brushless, using a closed-loop control (FOC) algorithm. This algorithm, also known as vector control (FOC), offers better performance than traditional stepper motor control systems, which allows the stepper motor to operate over the entire speed range, ensuring fast acceleration and deceleration, assuring more accurate motion control with no loss of steps. It is also more energy efficient than traditional control methods, as it uses precise rotor position feedback and controls the phase current, optimising motor operation. The Series DRVI compact design and integration with the main communication protocols make the Series DRVI the ideal solution for various industrial applications that require accurate control and fast response to load variations.

product-image

Electromechanical axes | Series 5E

Series 5E axes are mechanical linear actuators in which the rotary movement generated by a motor is converted into a linear movement using a toothed belt or a recirculating ball screw. Series 5E, available in 3 sizes - 50, 65 and 80, is designed with a special self-supporting square profile with a recirculating ball guide integrated within the actuator, to provide exceptional stiffness and resistance to external loads. The profile is covered by a stainless steel plate to protect the internal elements from environmental contaminants. The axis is equipped with a magnet that allows external proximity switches, enabling operations like homing or extra-stroke readings. These two versions make the Series 5E suitable to meet the needs of different industries, including packaging, assembly and automotive.

product-image

Direct Acting Solenoid Valves | Series KL - KLE

The latest Series KL and KLE miniaturized 10mm solenoid valves have been designed for industrial applications and medical devices that require high flow rates and pressures within compact dimensions. The body size and overall dimensions of both versions have been designed to allow easy integration with manifold systems or subbases and to be quickly installed on devices and machines. Series KL and KLE are available in different models to satisfy any application across all the main sectors of industrial automation and life science.

product-image

Proportional Pressure Regulator | Series PME

The Series PME proportional pressure regulator is the ideal solution for industrial applications that require accurate pressure control. This new pressure regulator offers a high performance, despite having its weight and dimensions reduced to a minimum to allow greater flexibility in its use. Series PME is available in two sizes and versions. One version has an integrated exhaust valve that allows the system to discharge even in the absence of power. The second is a manifold version, ideal for controlling several outlets with only a single inlet. A new CANopen serial version is also available. Ideal for controlling multiple controllers on a single fieldbus and for applications that need to operate within a wide supply voltage range (12÷24 V DC). Each has been designed to meet a wide range of applications and to guarantee reliable and precise control across the entire system.

product-image

Pressure Booster Size 40 | Series BPA

The Pressure Booster Series BPA has a pressure ratio of 1:2 that increases outlet pressure by up to 20 bar. It operates automatically when needed to generate a constant pressure increase while its mechanical design guarantees quick and easy installation, minimises heat generation and improves machine safety. Two versions are available, with or without an integrated regulator that allows to adjust the desired outlet pressure and enables the efficient management of energy consumption. It offers a compact, functional design with rapid filling times that makes the Series BPA ideal for applications where high pressure is only needed at specific points in the pneumatic circuit such as: - Woodworking - Marble and glass processing - Testing and assembly machines

product-image

Pneumatics Slides | Serie MSN

The MSN series mini slides are ideal for controlling precise motion. They are therefore ideal for pick & place and insertion applications often found in the assembly and secondary packaging industries. Available in four different sizes, this series offers fluid and precise motion, thanks to the combination of a pneumatic cylinder and a precision ball bearing guide. These mini slides offer fast and precise handling, ideal for applications that operate with high load pickup frequency. They also feature integrated proximity switches for position monitoring to achieve a high level of precision and maintain a constant position over time. With their compact and lightweight design, the MSN series mini slides are also used in tight installation spaces and in industrial applications that require high flexibility in handling loads.

product-image

Pneumatics Slides | Serie MST

The MST series pneumatic slides are the ideal solution for applications requiring high force and extremely precise positioning, such as in the assembly and packaging industries. The combination of a dual-piston pneumatic cylinder and precision roller guide provides extremely accurate positioning that minimizes positioning errors while increasing overall system efficiency. The MST series is available in six different sizes and standard strokes. With special accessories, it is possible to adjust the stroke length in both positions: extended and retracted, which increases the flexibility and versatility of the product. In addition, this series is compatible with magnetic switches for position detection, making it particularly suitable for applications that require fast and precise positioning. Thanks to its reliability and compact dimensions, the MST series is the right choice to optimize the performance of any system and guarantee very precise and reliable results.

product-image

Media Seperatetd Solenoid Valves | Serie KDV

The media-separating solenoid valves Series KDV are designed to control critical fluids such as aggressive, high-purity or temperature-sensitive fluids. To prevent the controlled fluid from interacting with the internal mechanical part of the valve, the orifices are opened or closed using a separating diaphragm, driven by an actuator. In addition to protecting the controlled fluid from contamination or excessive temperature fluctuations, the diaphragm protects the actuator system from any possible corrosion caused by aggressive fluids. Furthermore, the overall dimensions and reduced footprint allow easy and quick integration with manifold or subbase systems within small equipment as well as portable devices. Its compact design, light weight and low power consumption make the Series KDV the ideal solution for Life Science applications, such as mass spectrometry, liquid and gas chromatography and molecular analysis.

product-image

Pneumatics in Transition: Smart through Digitalization

Camozzi Automation and Hans E. Winkelmann GmbH have developed a proven collaboration based on trust and efficiency, with the aim of taking pneumatic drive technology to a new level through digitalization and innovation. Pneumatics plays an essential role in automation: Despite the flexibility and efficiency of electric drive technology, pneumatic drive technology remains a reliable and loyal partner in automation. This technology is particularly in demand in areas where precision and robustness are required. The challenge lies in combining this proven technology with modern digital solutions. This is where the two companies come in to make pneumatics fit for the digital future. The smart cylinder project: The smart cylinder project was launched as part of the partnership. The aim was to combine traditional pneumatics with the possibilities of modern digitalization. The result is an innovative system that improves the efficiency and precision of pneumatic cylinders and sets new standards in automation technology. The system enables pneumatic systems to be monitored, controlled and optimized in real time, making production processes faster, more accurate and more reliable. Expansion with the valve terminal: 2025 The smart cylinder project will be further expanded. A valve terminal will also be integrated to enable even more flexibility and simplified integration into existing automation environments. This expansion strengthens the partnership and offers new solutions for future challenges in automation technology. This continuous development and the close cooperation between Camozzi Automation and Hans E. Winkelmann GmbH form the basis for innovative, future-proof solutions in industrial automation.

product-image

Electromechanical cylinders Series 6E

Sizes 32, 40, 50, 63, 80, 100 The 6E series cylinders are mechanical linear actuators with rod, in which the rotary movement generated by a motor is converted into a linear movement by means of a ball screw. These cylinders are available in 6 sizes and have dimensions based on the standard ISO 15552, making it possible to use the mounting accessories of the pneumatic cylinders. They are equipped with a magnet that allows the use of external magnetic proximity switches (Series CST and CSH) to perform operations such as homing or extra stroke readings. The 6E series is equipped with special interface kits that allow the motor to be connected both in series and in parallel. Very high precision and easy installation make the 6E series the ideal solution for various applications, especially for multi-position systems.

product-image

YOUR MOTION SOLUTIONS PROVIDER

The Series D valve terminal is one of the key technologies for modern automation. It is compact, modular and easy to integrate into advanced systems. Thanks to the proprietary CoilVision® technology, it continuously monitors the status of the solenoid valves, provides operating data and enables predictive maintenance to minimise downtimes. The portfolio is complemented by the PRE series proportional pressure regulator, which is also equipped with CoilVision®. It ensures dynamic pressure control and optimised maintenance management. The new collaborative gripper series CSPT is an intelligent pneumatic gripping system with integrated valves and sensors. It records and transmits data, measures and controls force and position, thereby increasing process quality, cycle times and efficiency. Intelligent consumption and energy monitoring is provided by the smart FSX series flow meter, which continuously monitors parameters such as flow rate, temperature, humidity and pressure. The BPA series booster enables a local pressure increase in pneumatic circuits without affecting the overall pressure - ideal for targeted performance increases of individual devices with optimised energy consumption. The range is rounded off by the compact Series 3E electromechanical cylinders in combination with the DRVI drive, where the integration of motor and actuator with vector control technology optimises operation and reduces energy consumption. In the field of collaborative robotics, the new pneumatic gripper series CSSP sets standards: safe, precise and user-friendly for machine tending and end-of-line applications. The range has been expanded to include END LOCK cylinders Series 63 with automatic mechanical end position locking and MD Safemax safety valves with sensors and fast venting - ideal for critical applications.